NEC Televisão de ecrã plano NLT 20 Manual do Utilizador

Warnings

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Owner's Manual

WARNING :

To reduce the risk of electric shock do not remove cover (or back).

No user serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying

the appliance.

WARNING :

To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub

or strike the Active Matrix LCD with anything hard as this may scratch, marked, or

damage the Active Matrix LCD permanently.

- The appliance is not intended for use by young children or infirm persons without

supervision.

- Young children should be supervised to ensure that they do not play with the

appliance.

CAUTION:

Do not attempt to modify this product in any way without written authorization.

Unauthorized modification could void the user’s authority to operate this product.

Power

This set operates on a DC supply provided by the AC-DC adaptor, the voltage is as

indicated on the label on the back cover. Use only the AC-DC adaptor supplied with

the set and never apply an AC mains to the set directly. The AC-DC adaptor operates

on an AC mains supply, the voltage is as indicated on the label of the AC-DC

adaptor.

a. Connect the DC plug of the AC-DC adaptor to the 15V socket of the set.

b. Connect the AC-DC adaptor and it’s power cord.

c. Connect the power cord to an AC mains.

In the event of thunderstorms or power cuts, please pull out the mains plug of the

AC-DC adaptor and the aerial plug. Do not allow anything to rest upon or roll over the

power cord, and do not place the set where the power cord is subject to damage.

Model:NLT-20

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Supplied Accessories

Controls

L Make Sure the following accessories are provided with Product.

<<CONTROLLER OF PANEL>>

1. ON/OFF Switches TV set on or off.

2. MENU

Displays a menu.

3. ꢀ PR ꢁ (Programme Up/Down)

Selects a programme or a menu item.

1. AC/DC adaptor

2. AC Cord

4. ꢀVOLꢁ (Volume Up/Down)

Adjusts the volume./ Adjusts menu settings.

5. TV/AV

Selects TV, COMPONENT, VIDEO, S-VIDEO or PC mode / Clears the menu from the

screen.

6. POWER STANDBY INDICATOR

Illuminates in red when the TV is in standby mode. / Illuminates in green when the TV is

switched on.

7. Remote control sensor Accepts the IR signal of remote controller.

3. Remote controller

4. Batteries (type AAA)

POWER

PSM

SSM

I/II

TV/AV

VOL

TV/PC

SLEEP

TEXT/MIX

Q.VIEW

LIST

UPDATE TIME REVEAL HOLD

NS-201

5. Owner’s manual

6. PC IN cable

Owner's Manual

1. DC 15V IN

2. PC/DTV INPUT

3. COMPONENT IN

4. H/P(Headphone out)

Connect a headphone to this socket.

5. S-VIDEO IN

Model:NLT-20

Connect the output of an S-VIDEO VCR to the S-VIDEO input.

Connect the audio outputs of an S-VIDEO VCR to the AV-IN audio inputs.

6. AV-IN

Connect the Audio/Video outputs of external equipment to these inputs.

7. AV-OUT

Connect the Audio outputs(L, R) of the set to Audio-IN(L, R) of another displayer or

the amplifier and the Video output of the set to Video IN of another displayer.

8. Ant. (Antenna input)

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Controls

All the functions can be controlled with the remote controller. Some functions can

also be adjusted with the buttons on the front panel of the set.

11. PRxy (Programme Up/Down)

Selects next programme or a menu item.

POWER

Remote controller

12. VOLÏq (Volume Up/Down)

Adjusts the sound level.

Adjusts menu settings.

Before you use the remote controller, please install the batteries.

1. POWER

13. OK

POWER

Turns the TV on from standby or off to standby mode.

Accepts your selection or displays the current mode.

PSM

SSM

I/II

TV/AV

2. MUTE

14. Q.VIEW

Turns the sound on and off.

Returns to the previously viewed programme.

Note : In Teletext mode, The Q.VIEW button is used.

VOL

3. NUMBER buttons

TV/PC

SLEEP

Select programme numbers.

15. TELETEXT buttons

PSM

SSM

I/II

TEXT/MIX

Q.VIEW

LIST

TV/AV

These buttons are used for Teletext.

For further details, see the ‘Teletext’ section.

4. PSM (Picture Status Memory)

Recalls your preferred picture setting

UPDATE TIME REVEAL HOLD

VOL

16. LIST

5. SSM (Sound Status Memory)

TV/PC

SLEEP

Displays the programme list menu.

Recalls your preferred sound setting

TEXT/MIX

Q.VIEW

LIST

NS-201

6. I/II

Selects the language during dual language broadcast.

Selects the sound output.

UPDATE TIME REVEAL HOLD

Battery installation

7. MENU

uInserting batteries

Displays a main menu.

1. Remove the battery cover by pulling it upward in the direction shown by the arrow.

2. Insert the batteries with correct polarity ( "+" to "+", and "-" to "-" ).

3. Replace the battery compartment cover.

NS-201

8. TV/AV

Selects TV, COMPONENT, VIDEO, S-VIDEO or PC mode.

Clears the menu from the screen.

9. SLEEP

Sets the sleep timer.

10. TV/PC

Selects TV or PC mode.

* Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with

new batteries.

*Remove batteries when you won't use the remote controller for long time. Liquid

leakage from old batteries may cause operation failure.

uNotes for using remote controller

• Make sure there are no objects between the remote controller and its sensor.

• Don't place the remote control near a heater or in damp place. Strong impact to the

remote control may cause operation failure.

• Signal from the remote control may be disturbed by sun light or other bright light. In

this case, darken the room or move the TV.

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Basic Operation

On Screen Menus and Displays

1. Press the MENU button to display main menu.

2. Press the PR xy button to select menus-Picture, Sound, Special, Setup.

3. Adjust each menu with the VOLÏq button.

4. Press the MENU button to return to preceding menu.

5. Press the TV/AV button to finish adjusting menu.

Turning the TV On and Off

POWER

Standby Setup: The AC-DC converter and the AC power cord

must be set up and connected to have the TV in standby

mode ready to be turned on. Press the power button on the

front panel of the TV to go into standby mode.

Equalizer

Flat

Music

Movie

1. If the TV is in standby mode, press the Power button on

the remote controller or the TV itself to turn the TV on.

2. Press the Power button again on the remote controller

or the TV itself to turn the TV off.

Main menu

Picture

Sound

Special

Setup

Picture

Contrast

Brightness

Colour

Speech

User

ꢂꢃꢄ ꢂꢃꢅ ꢄꢃꢅꢀ ꢅꢃꢂꢀꢀꢄꢂ3Pb

PSM

SSM

I/II

TV/AV

Sharpness

Note : If the TV is on and the power button is pressed to turn

ƇƉ 5-6=ꢀꢀ<>ꢁ)>

the TV off, the TV goes into standby mode.

VOL

Auto programme

TV/PC

SLEEP

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

System

Storage from

Start

Programme selection

TEXT/MIX

Q.VIEW

LIST

You can select a Programme number with the PRxy button

or NUMBER buttons.

Sound

Equalizer

Balance

AVL

Off

UPDATE TIME REVEAL HOLD

POWER

Surround

Volume adjustment

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

Press the VOLÏq button to adjust the sound level.

NS-201

Manual programme

System

Channel

Fine

Name

ȘȘȘ

0 0 0 0 0

Quick view

V/UHF

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

Press the Q.VIEW button to view the last channel you were

PSM

SSM

I/II

watching.

TV/AV

Special

Storage

Input

Off

Auto Sleep

Blue back

VOL

Sound mute function

ƇƉ ȖȘ 73ꢀ5-6=ꢀ<>ꢁ)>

Press the MUTE button. The sound is switched off and the

TV/PC

SLEEP

mute display

appears.

Programme edit

TEXT/MIX

Q.VIEW

LIST

To cancel mute mode, press the MUTE button again, VOLÏq

or SSM button.

1 0 0 0 0 0

2 0 0 0 0 0

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

UPDATE TIME REVEAL HOLD

■ Delete

■ Move

■ Copy

■ Skip

On screen menu language selection

The menu can be displayed on the screen in desired

language.

Língua

Setup

Deutsch

Français

Italiano

Español

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

Auto programme

Manual programme

Programme edit

Língua

First select your language.

NS-201

1. Press the MENU button.

2. Select the Setup menu.

Then press the VOLÏq button.

3. Select the Língua menu.

4. Press the PRxy button to select your desired

language.

5. Press the TV/AV button.

All the on screen displays will appear in the selected

language.

Língua

Deutsch

Français

Italiano

Español

ƇƉ 5-6=ꢀꢀ<>ꢁ)>

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

ƇƉ 5-6=ꢀꢀ<>ꢁ)>

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Setting up TV Programme

Once you have preset the programmes, you will be able to

use the PRxy or NUMBER buttons to scan the

programmes you programmed.

Programmes can be tuned using automatic or manual

modes.

Manual programme

Auto programme

Manual programme

System

Channel

Fine

Manual Programme lets you manually tune and arrange the

programmes in whatever order you desire. Also you can

assign a programme name with 5 characters to each

programme number.

Storage from

Start

V/UHF

ȘȘȘ

Name

Storage

ȘȘȘ

0 0 0 0 0

1. Press the MENU button.

2. Select the Setup menu.

Then press the VOLÏq button.

3. Select Manual programme menu.

Then press the VOLÏq button.

Auto programme

All programmes that can be received are stored by this

method. It is recommended that you use Auto programme

during installation of this set.

ƇƉ ȖȘ 73ꢀ5-6=ꢀ<>ꢁ)>

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

4. Press the PRxy button to select System.

5. Select a TV system with the VOLÏq button.

BG : (Germany/Asia/M.East/Africa/Australia)

1. Press the MENU button.

POWER

2. Select the Setup menu.

Then press the VOLÏq button.

3. Select the Auto programme menu.

Then press the VOLÏq button.

4. Press the PRxy button to select System menu.

5. Select a TV system with the VOLÏq button;

BG : (Germany/Asia/M.East/Africa/Australia)

: (UK/Hong Kong/South Africa)

DK : (CIS/China/East Europe)

: (KOREA, USA, PHILIPPINES)

6. Press the PRxy button to select Channel. Press

the VOLÏq button to select V/UHF or Cable as

required. If possible, select the programme number

directly with the NUMBER buttons.

PSM

SSM

I/II

PSM

SSM

I/II

: (UK/Hong Kong/South Africa)

DK : (CIS/China/East Europe)

: (KOREA, USA, PHILIPPINES)

TV/AV

7. Press the PRxy button to select Search. Press the

VOLÏq button to commence searching. If a channel

is found the search will stop.

8. Press the PRxy button to select NAME, press the

VOLÏq button to allocate the location and use

PRxy button to select the character(blank, +, -,

Alphabet A to Z, Numeric 0 to 9).

9. If this Programme is the one required, press the

PRxy button to select Storage. Select the desired

programme number with the VOLÏq button or

NUMBER buttons.

VOL

6. Press the PRxy button to select Storage from.

7. Select the beginning programme number with the

VOLÏq button or NUMBER buttons.

8. Select START, then press the VOLÏq button.

Press Menu button to finish Auto programme.

9. Press the MENU button to finish Auto programme.

10. Press the TV/AV button to return to normal TV

viewing.

TV/PC

SLEEP

TV/PC

SLEEP

TEXT/MIX

Q.VIEW

LIST

TEXT/MIX

Q.VIEW

LIST

UPDATE TIME REVEAL HOLD

10. Press the OK button to store it. The display Stored

will appear.

NS-201

To store another Programme, repeat steps 5 to 10.

11. If the TV picture reception is not good, then do the

fine tuning. Select FINE, then adjust the received

signal with the VOLÏq button.

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Setting up TV Programme

Picture Control

You can adjust picture Contrast, Brightness, Colour and Sharpness to the levels you

prefer.

Programme edit

This function enables you to delete or skip the stored

programmes.

1 0 0 0 0 0

2 0 0 0 0 0

Also you can move some programmes to other programme

numbers or insert a blank programme data into the

selected programme number.

Manual Picture Control

Picture

1. Press the MENU button.

Contrast

Brightness

Colour

■ Delete

■ Move

■ Copy

■ Skip

2. Select the Picture menu.

1. Press the MENU button.

Then press the VOLÏq button.

Sharpness

2. Select the Setup menu. Then press the VOLÏq button.

3. Press the PRxy button select Programme edit menu.

Then press the VOLÏq button.

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

3. Press the PRxy button select a picture item.

4. Press the VOLÏq button to adjust the picture

condition as you want.

4. Select the programme name to edit with the PRxy and

VOLÏq button.

5. Press the TV/AV button to store for the picture User.

POWER

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

Selected Item

Contrast

Deleting a programme

Setting Change

1. Select a programme to be deleted with the PRxy

or VOLÏq button.

POWER

More darkness VOLÏ 0~100 qVOL More light

Less bright VOLÏ 0~100 qVOL More bright

Lower color intensity VOLÏ 0~100 qVOL Higher color intensity

Soft picture VOLÏ 0~100 qVOL Sharp picture

2. Press the RED button twice.

The selected programme is deleted, all the following

programmes are shifted up one position.

Brightness

Colour

PSM

SSM

I/II

TV/AV

Copying a programme

1. Select a programme to be copied with the PRxy or

VOLÏq button.

VOL

PSM

SSM

I/II

2. Press the GREEN button.

All the following programmes are shifted down one

position.

TV/PC

SLEEP

TV/AV

Sharpness

TEXT/MIX

Q.VIEW

LIST

VOL

* Tint menu only appears at NTSC signal.

Moving a programme

TV/PC

SLEEP

UPDATE TIME REVEAL HOLD

1. Select a programme to be moved with the PRxy or

VOLÏq button.

TEXT/MIX

Q.VIEW

LIST

Auto Picture Control

2. Press the YELLOW button.

*The Picture options - Dynamic, Standard, Mild, Game,

and User are programmed for optimum reproduction at

the factory and cannot be changed.

3. Move the prgramme to desired programme number

with the PRxy or VOLÏq button.

4. Press the YELLOW button again to release this

function.

UPDATE TIME REVEAL HOLD

NS-201

PSM (Picture Status Memory)

1. Press the PSM button.

2. Press the PSM button repeatedly to select [PSM].

Each press of the button changes the screen display as

below.

Skipping a programme number

NS-201

1. Select a programme number to be skipped with the

PRxy or VOLÏq button.

2. Press the CYAN button. The skipped programme

turns to blue.

3. Press the CYAN button again to release the skipped

programme.

Dynamic

Standard

Mild

Game

User

Note : When a programme number is skipped it means

that you will be unable to select it using the PRxy

button during normal TV viewing. If you want to select

the skipped programme. directly enter the programme

number with the NUMBER buttons or select it in the

programme edit or table menu.

• Dynamic : Vivid Picture Appearance

• Standard : Standard Picture Appearance

• Mild : Softer Picture Appearance

• Game : External Video Game Picture Setup

• User : Manual Picture Setup

5. Press the TV/AV button to return to normal TV viewing.

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Sound Control

Other functions

You can select your preferred sound setting; Flat, Music,

Movie or Speech and you can also adjust the sound

frequency of equalizer, balance. If you switch AVL to on,

the set automatically keeps on an equal volume level even

if you change programmes.

TV, COMPONENT, VIDEO and S-VIDEO modes

(You can’t set PC mode in this menu. Use the TV/AV or

TV/PC mode.)

External equipment inputs: VIDEO or S-VIDEO mode are

used for video devices like VCRs, DVDs, etc.),

COMPONENT, is used for component type devices.

Sound

Equalizer

Balance

AVL

Special

Input

Auto Sleep

Blue back

Off

Surround

1. Press the MENU button.

2. Select the Sound menu.

Then press the VOLÏq button.

3. Press the PRxy button to select the desired

sound item; Equalizer, Balance, AVL or Surround.

4. Press the VOLÏq button to make desired

adjustment.

Note : If a VCR is connected to the antenna jack, use TV

mode. See External Equipment Connection section.

1. Press the MENU button.

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

2. Select the Special menu.

POWER

3. Press the PRxy button to select Input.

4. Press the VOLÏq button to select TV, COMPONENT,

VIDEO and S-VIDEO.

POWER

Equalizer

Flat

Music

Movie

Speech

COMPONENT : Device connected to the COMPONENT

INPUT.

User

ꢂꢃꢄ ꢂꢃꢅ ꢄꢃꢅꢀ ꢅꢃꢂꢀꢀꢄꢂ3Pb

PSM

SSM

I/II

VIDEO : VIDEO device connected to the TV's VIDEO Input.

S-VIDEO : S-VIDEO device connected to the TV's S-

VIDEO Input.

PSM

SSM

I/II

TV/AV

ƇƉ 5-6=ꢀꢀ<>ꢁ)>

VOL

5. At Equalizer selection, press the PRxy button to

select your preferred setting ; Flat, Music, Movie,

Speech or User.

To return to TV mode, press the TV/AV buttons repeatedly.

TV/PC

SLEEP

TV/PC

SLEEP

Alternatively you can select the TV, COMPONENT, VIDEO,

S-VIDEO or PC mode by pressing the TV/AV button.

TEXT/MIX

Q.VIEW

LIST

To set the Equalizer User.

TEXT/MIX

Q.VIEW

LIST

a. Select User by pressing the PRxy button.

b. Select a sound band by pressing the VOLÏq button.

c. Make appropriate sound level with the PRxy button.

d. Press the MENU button to return to preceding menu

and the TV/AV button to return to normal TV viewing.

6. Select the Balance menu and adjust the balance of

speakers.

Auto sleep

UPDATE TIME REVEAL HOLD

If you select Auto sleep On the set will automatically

switch itself to standby mode approximately ten minutes

after a TV Channel stops broadcasting.

1. Repeatedly press the MENU button to select the

Special menu.

NS-201

7. Select the AVL(Automatic Volume Leveler) menu On or Off.

8. Select the Surround menu On or Off.

2. Press the PRxy button to select Auto sleep.

3. Press the VOLÏq button to select On.

4. Press the TV/AV button to return to normal TV

viewing.

Auto Sound Control

* The sound Flat, Music, Movie and Speech are programmed for optimum

Blue back

reproduction at the factory and cannot be changed.

Programme without a program signal appear in blue.

SSM (Sound Status Memory)

1. Press the SSM button.

2. Press the SSM button repeatedly to select.

Each press of the button changes the screen display as below.

Flat

Music

Movie

Speech

User

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Other functions

Teletext

Calling the programme list

You can check the programmes stored in the memory by

displaying the programme list.

TEXT On/Off

Programme list

1. Press TEXT/MIX button once, displays the Teletext pages.

2. Press TEXT/MIX button once more, displays the Teletext

pages superimposed on the TV picture.

3. Press the TEXT/MIX button to switch off Teletext.

Text mode is off, and TV mode appears.

If you press TEXT/MIX button repeatedly, displays are changed

as below.

POWER

1 0 0 0 0 0

2 0 0 0 0 0

Displaying programme list

1. Press the LIST button to display the Programme

list menu. The programme list appears on the

screen. One programme list contains ten

programmes as right.

ƇƉ ȖȘ 73ꢀ5-6=ꢀ<>ꢁ)>ꢀꢀ

Note :

PSM

SSM

I/II

a. You may find some blue programmes. They have been set up to be skipped by

auto programming or in the programme edit mode.

b. Some programmes with the channel number shown in the programme list

indicate there is no station name assigned.

TEXT

MIX

TV mode

TV/AV

VOL

Selecting a programme in the programme list

TV/PC

SLEEP

Select a progranne with the PRxy or VOLÏq button.

Then press the OK button.

The set switches to the chosen programme number.

TOP text

TEXT/MIX

Q.VIEW

LIST

The user guide displays four fields-red, green, yellow and blue

at the bottom of the screen. The yellow field denotes the next

group and the blue field indicates the next block.

UPDATE TIME REVEAL HOLD

Paging through a programme list

There are 10 programme table pages in which contain 100 programmes.

Pressing the PRxy or VOLÏq button repeatedly turns the pages.

Group/block/page selection

1. With the BLUE button you can progress from block to block.

2. Use the YELLOW button to proceed to the next group with

automatic overflow to the next block.

3. With the GREEN button you can proceed to the next

existing page with automatic overflow to the next group.

Alternatively the x button can be used.

NS-201

Sleep timer

You don’t have to remember to switch the set off before

POWER

you go to sleep. The sleep timer automatically switches

the set to standby after the preset time elapses.

Press the SLEEP button to select the number of minutes.

The display will appear on the screen, followed by 0, 10,

20, 30, 60, 90, 120, 180 and 240. The timer begins to

count down from the number of minutes selected.

Note : a. To view the remaining sleep time, press the

SLEEP button once.

4. The RED button permits to return to previous selection.

Alternatively the y button can be used

FLOF text

The Teletext pages are colour coded along the bottom of the screen and are

selected by pressing the corresponding coloured button.

PSM

SSM

I/II

TV/AV

b. To cancel the sleep time, repeatedly press the SLEEP

button until it displays “0”.

Page selection

VOL

1. Press the INDEX button to select the index page.

2. You can select the pages, which are colour coded along the bottom line with

the same coloured buttons.

TV/PC

Sound output selection

In VIDEO mode, you can select output sound for the left

and right loud-speakers.

SLEEP

TEXT/MIX

Q.VIEW

LIST

3. The VOLÏq button can be used to select the preceding or following page.

Repeatedly press the I/II button to select the sound

output.

UPDATE TIME REVEAL HOLD

L+R : Audio signal from audio L input is sent to left loud-

speaker and audio signal from audio R input is sent

to right loud-speaker.

L+L : Audio signal from audio L input is sent to left and

right loud-speakers.

NS-201

R+R : Audio signal from audio R input is sent to left and

right loud-speakers.

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Teletext

External Equipment Connection

When connecting to external equipment, please ensure you turn the main switch OFF

to prevent any damage to the equipment.

You can connect additional equipment, such as VCRs, camcorders etc. to your set.

Examples are shown below.

Special Teletext functions

Functions

Changes Teletext mode

; Only Teletext mode, text mode superimposed on the

TV picture, TV mode

TEXT/MIX

Antenna connection

1. Connect RF out on the VCR to the

Antenna input on the rear of the TV.

2. Connect the antenna cable to the

Selects double height text.

Press this button to enlarge the top half of the page.

Press this button again to enlarge the bottom half of

the page.

antenna in jack on the VCR.

3. Press the TV/AV button to select

Antenna input source.

DC 15V

PC/DTV INPUT

H/P S-VIDEO

VIDEO

A/V-IN

A/V-OUT

VIDEO

ANT.

SIZE

Press this button again to return to the normal display.

4. Press the PLAY button on the VCR.

VCR

Stops the automatic page change, which will occur if a

Teletext page consists of 2 or more sub pages. The

number of sub pages and the sub page displayed is,

usually, shown on the screen below the time. When

this button is pressed the stop symbol is displayed at

the top left-hand corner of the screen and the

automatic page change is inhibited. To continue press

this button again.

HOLD

COMPONENT INPUT

1. Connect the Video outputs (Y Cb Cr) on

a DVD to the COMPONENT on the TV.

2. Press the TV/AV button to select

COMPONENT mode.

DC 15V

PC/DTV INPUT

H/P S-VIDEO

VIDEO

A/V-IN

A/V-OUT

ANT.

VIDEO

Return to index page

INDEX

COMPONENT

(DVD)

3. Press the PLAY button on the DVD.

Displays the TV picture on the screen while waiting for

the new Teletext page. The display will appear at the

top left hand corner of the screen. When the updated

page is available then display will change to the page

number.

UPDATE

A/V INPUT

Press this button to view the updated Teletext page.

1. Connect the A/V out jacks on a VCR

to A/V-IN jacks on the TV.

2. Press the TV/AV button to select

VIDEO mode.

3. Press the PLAY button on the VCR.

The VCR playback picture appears on the

TV screen.

Note : If you have a mono VCR, connect the

audio cable from the VCR to the A/V-IN socket of the set.

When viewing a TV programme, press this button to

display the time at the top right hand corner of the

screen. Press this button again to remove the display.

In Teletext mode press this button to select and hold

or change a four-digit sub page number. This is

displayed along the bottom of the screen. Press this

button again to exit this function.

DC 15V

PC/DTV INPUT

H/P S-VIDEO

VIDEO

A/V-IN

A/V-OUT

ANT.

VIDEO

TIME

VCR

Press this button to display the concealed information,

such as solutions of riddles or puzzles.

Press this button again to remove the information from

the display.

REVEAL

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

External Equipment Connection

Connecting PC as monitor

A/V OUT

VGA/DTV INPUT

ANT.

PC/DTV INPUT

H/P S-VIDEO

VIDEO

A/V-IN

A/V-OUT

VIDEO

DC 15V

1. Connect the Audio outputs(L, R) of the TV to Audio-IN(L, R) of another

displayer or the amplifier system

1. Connect the VGA IN cable

(D sub jack) from the monitor

output socket of the PC to the

- If you connect the amplifier system, you can also play the TV sound through

the stereo amplifier system.

2. Connect the Video output of the TV to Video IN of another displlayer.

Note : If you press the mute button, only the sound of the TV’s speaker’s are

switched off.

PC/DTV input socket of the set.

2. Connect the Audio cable from the

PC to the A/V IN(L(MONO), R) of

the set.

3. Press the TV/AV button to select PC mode.

4. Switch on the PC, and the PC screen appears on the set.

The set can be operated as the PC monitor.

Resolution

Horizontal

Vertical

Mode

Resolution

DC 15V

PC/DTV INPUT

H/P S-VIDEO

VIDEO

A/V-IN

A/V-OUT

VIDEO

ANT.

DC 15V

PC/DTV INPUT

H/P S-VIDEO

VIDEO

A/V-IN

A/V-OUT

VIDEO

ANT.

frequency (KHz) frequency (Hz)

640X480

720X400

31.5 KHz

35 KHz

37.9 KHz

37.5 KHz

43.5 KHz

31.5 KHz

60 Hz

67 Hz

72 Hz

75 Hz

85 Hz

70 Hz

Displayer

Amplifier

VGA

S-VIDEO INPUT

800X600

35.2 KHz

37.9 KHz

48.1 KHz

46.9 KHz

53.7 KHz

56 Hz

60 Hz

72 Hz

75 Hz

85 Hz

If using an S-VIDEO source, the picture

quality will be improved over a video source.

1. Connect the S-VIDEO output of a

VCR to the S-VIDEO input on the TV.

2. Connect the audio cables from the

S-VIDEO VCR to the L (MONO) R

inputs on the TV.

SVGA

HDTV

DC 15V

PC/DTV INPUT

H/P S-VIDEO

VIDEO

A/V-IN

A/V-OUT

VIDEO

ANT.

576p

1080i

50Hz

3. Select S-VIDEO mode by pressing the

TV/AV button repeatedly.

4. Press the PLAY button on the VCR.

S-VIDEO VCR

The VCR playback picture appears on the screen.

Note:

a. If the set is cold, there may be a small “flicker” when the set is switched on. This is

normal, there is nothing wrong with the set.

b. Some dot defects may appear on the screen, like Red, Green or Blue spots.

However, this will have no impact or effect on the monitor performance.

c. When resolutions are displayed that are not native to the panel resolution,

text may appear choppy or lines may appear to be bold or thicker than others.

To minimize, choose a resolution similar to the panel.

Headphone jack

Insert the headphone plug to the headphone jack on the TV. You can listen to the

sound through the headphone; no sound form the speaker on the TV. To adjust the

headphone volume, press the VOLÏq button. If you press the MUTE button, the

sound from the headphone is turned off.

Headphone

DC 15V

PC/DTV INPUT

H/P S-VIDEO

VIDEO

A/V-IN

A/V-OUT

VIDEO

ANT.

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Connecting PC as monitor

Product Spec.

Picture adjustment

Contrast

Model

NLT-20

You can adjust picture Contrast, Brightness, Temperature,

Horizontal/Vertical position, Clock, Phase, Auto and Reset

Horizontal size 575(575) mm Thickness 60(160)mm

as you prefer.

100

Main body(with stand)

1. Press the TV/PC button to select the PC mode.

2. Press the MENU button.

Height

395(450) mm Weight 7.85(9.11) kg

AUTO

3. Press the PRxy button to select the desired

picture item.

4. Press the VOLÏq button to make appropriate

adjustments.

640 X 480

Power requirements

Television system

Television programme

LCD Panel

DC 15V/4.5A

ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>

PAL-BG, I, DK/ SECAM-BG, DK/ NTSC-M

VHF: 2~12 UHF :21~69 Cable : S1~S41

20.1" TFT LCD panel

Contrast

Clock

Phase

Auto

Brightness

Temperature

H-position

V-position

POWER

AUTO

Power consumption

70W

Reset

External antenna impedance 751

Contrast

Audio output

3W +3W

This function is to adjust picture to light/dark.

Brightness

PSM

SSM

I/II

TV/AV

• ANTENNA IN

• PC IN

• HEADPHONE JACK

• AV IN

• DC 15V IN

This function is to adjust brightness of picture.

Temperature

Temperature is a measure of the warmth of the image color.

Horizontal Position/Vertical Position

This function is to adjust picture to left/right and up/down

as you prefer.

• COMPONENT IN

• S-VIDEO IN

• AV OUT

External input ports

VOL

TV/PC

SLEEP

TEXT/MIX

Q.VIEW

LIST

AC 100-240, 50/60Hz

Output : 15Vdc, 4.5A

AC Power Adaptor

Clock

This function is to minimize any vertical bars or stripes

visible on the screen background. And the horizontal

screen size will also change.

UPDATE TIME REVEAL HOLD

• Although the LCD panel uses highly precise technology, it may display blank pixels,

dark spots or lighting pixels on the screen. This is normal and not an indication of a

defect.

Phase

This function allows you to remove any horizontal noise

and clear or sharpen the image of characters.

Auto

NS-201

• Technical specifications are subject to change without notice.

This function is for the automatic adjustment of the screen

position, clock and clock phase. The displayed image will

disappear for a few seconds while the Auto-configuration

is in process.

Note: Some signal from some graphics boards may not

function properly. If the results are unsatisfactory, adjust

your monitor’s position, clock and clock phase manually.

Reset

This function allows you to return to the good picture

reproduction programmed at the factory and cannot be

changed.

5. Press the TV/AV button to store the adjustment.

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

Troubleshooting

NEC Australia Pty. Ltd.

ABN 86 001 217 527

Home Electronics Group

Problem

Check item

• Insert the AC power cord plug securely in AC power

outlet.

• Make sure the LCD TV is not in the standby mode

(The POWER/Standby indicator is red.)

No picture on screen and no sound

from speakers.

NEC Service Centres

• Check the brightness setting of the display.

• Lamp may have malfunction.

No picture/No picture from AV

terminal.

New South Wales

Sydney

184 Milperra Rd, Revesby 2212

(02) 9780 8688

(02) 4926 2466

• Check the sound setting.

• Make sure the sound is not muted.

• Make sure the connectors of the optional speaker

system are securely inserted.

Picture is displayed, but no sound

from the speakers.

Newcastle 120 Parry Street, Newcastle West 2302

Victoria

Picture is too light.

Picture is too dark.

• Make sure COLOR and CONTRAST settings.

Melbourne Unit1/6, Garden Road, Clayton, 3168

131-632

• Make sure BRIGHTNESS setting is not set too low.

• Check to see if BRIGHTNESS setting.

• Lamp may have malfunction.

• Change the batteries.

Queensland

• Make sure the infrared transmitter window is not

receiving strong light such as light from fluorescent

lamps.

Remote control does not work.

Brisbane

Unit 4/305 Montague Road, West End, 4101

131-632

Southport Shop 1, 48 Ferry Road, Southport 4215

(07) 5591 3670

• The reception may be weak.

The TV picture is not sharp.

The TV picture moves.

• The state of the broadcast may also be bad.

• Make sure the antenna is facing the right direction.

• Make sure the outside antenna is not disconnected.

South Adelaide

• Make sure the antenna is facing the right direction.

• There may be reflected electric waves from

mountains or buildings.

The TV picture is doubled/tripled

(Ghosting)

Adelaide

84A Richmond Rd, Keswick, 5053

(08) 8375 5710

• There may be interference from automobiles, trains,

high voltage lines, neon lights, etc.

• There may be interference between the antenna cable

and power cable. Try positioning them further apart.

Western Australia

Perth 45 Sarich Court, Osbome Park 6017

The TV picture is spotted.

(08) 9445 5901

• Is the unit receiving interference from other devices?

Transmission antennas of radio broadcasting stations

and transmission antennas of amateur radios and

cellular phones may also cause interference.

For Service in outer areas, please contact your NEC retailer for the

address of the nearest Authorised NEC Service Centre

There are stripes on the screen or

colors fade.

• Use the unit as far apart as possible from devices

that may cause possible interference.

• Unplug the power cord of the adaptor from the AC

outlet to turn off and reset the unit.

Power button does not respond.

NEC Australia Pty. Ltd.

Home Electronics Group

244 Beecroft Road EPPING 2121

Tel:131-632

PC image not centered.

• Check the horizontal/vertical position setting.

• Check Clock and phase settings.

Try using ‘Auto’ function setting.

PC image not clear or has stripes.

Fax:(02) 9877 2353

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.

500-????031104

Transferir from Www.Somanuals.com. All Manuals Search And Transferir.